Brocade Communications Systems MLX Series Installation Manual page 387

FIGURE 240
1
Replacing the air filter in Brocade MLX and Brocade NetIron XMR 16-slot routers
Follow these steps to replace the air filter in a Brocade MLX or Brocade NetIron XMR 16-slot router.
1. Loosen the two screws in the front of the filter retainer.
2. Pull the filter retainer away from the router as shown in
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
Air filter removal and replacement for 32-slot routers
Direction of airflow in device
There is a hook on the back of the retainer that is attached to the grab-strap. As you pull the
retainer out, the filter is pulled along with it.
Replacing fan assemblies
1
Figure 241.
8
369