Brocade Communications Systems MLX Series Installation Manual page 124

2
Mounting Brocade MLXe-4, -8, or -16 routers in a 4-post rack or cabinet
3. Attach the side plates to the router using 8 4-40 flat head screws. Refer to
FIGURE 72
4. Attach the telescoping rails to the mounting posts in the cabinet or rack. Refer to
FIGURE 73
106
Attach the side plates to the rear sides of the device
Attach telescoping rails to cabinet or rack mounting posts (one rail shown)
Brocade MLX Series and NetIron XMR Hardware Installation Guide
Figure 72.
Figure 73,
53-1002373-02