Nibi-16-Fan-Exh-A High-Speed Fan Assemblies; Rack Mount Kit; Supported Software Features - Brocade Communications Systems MLX Series Installation Manual

The 32-slot router fan control modules include a bi-color LED, which indicates the status of the
fans.
TABLE 26
LED
Fan control LED
The router ships with fan assemblies fully installed. Fan assemblies are hot-swappable, which
means you can remove and replace them without powering down the system.

NIBI-16-FAN-EXH-A high-speed fan assemblies

NIBI-16-FAN-EXH-A high-speed fan assemblies are required for Brocade MLX Series 16-slot routers
when you install NI-MLX-10Gx8-M, NI-MLX-10Gx8-D, or NI-MLX-1Gx48-T-A modules. Brocade MLX
Series-16 routers ship with high-speed fan assemblies factory installed. Refer to
NIBI-16-FAN-EXH-A fan assemblies"

Rack mount kit

Brocade MLX Series and Brocade NetIron XMR routers can be mounted in a standard 19-inch
(EIA310-D) 2-post rack, using the pre-installed mounting brackets. For flush-mounting, simply use
the mounting brackets as installed. For mid-mounting, move the pre-installed brackets from the
front edges of the device to the holes provided in the sides of the device. For more information,
refer to the appropriate installation chapter for your router model.

Supported software features

For a complete list of software features supported on Brocade MLX Series and Brocade NetIron
XMR routers, refer to the Brocade MLX Series and Brocade NetIron Family Configuration Guide.
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
Table 26 describes the states for this LED.
Brocade MLX and Brocade NetIron XMR 32-slot router fan control LED
Position
Rear of router
on the fan
assembly
Supported software features
State Meaning
Off The fans are not receiving power.
Green The fans are working and responding to commands from the
fan control module.
Red The fans are not working and not responding to commands
the fan control module.
on page 182 for high-speed fan installation instructions.
1
"Installing
61