Brocade Communications Systems MLX Series Installation Manual page 134

2
Installing a Brocade MLXe-32 router
FIGURE 82
1
2
4. Use the provided standard #12-24, #10-32 or M6 pan head screws (dependent on the
5. Visually inspect the alignment of the router. If the router is installed properly, the mounting
116
Slide the device into the rack
2
1
Align bottom of router slightly above the seat of the saddle using mechanical lift.
Using at least two people, slide router gently onto saddle and into the rack.
specifications of your rack) in each available hole on the rack mount bracket to attach the
router to the rack mounting poles. See
screws on both sides rack should be aligned with the mounting screws on the opposite side
and the router should be level.
Figure 83.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1002373-02