Brocade Communications Systems MLX Series Installation Manual page 64

1
Router modules
FIGURE 28
1 Power
2 Port 1
3 Port 2
Single-Speed OC-192c POS interface modules
The front panel of the single-speed OC-192c POS interface modules contain the following features:
•
•
•
•
Figure
FIGURE 29
1 Power
FIGURE 30
1 Power
46
8-port OC-12c and OC-48c POS interface module
1 2 4 6 8
3 5 7 9
4 Port 3
5 Port 4
6 Port 5
One or two ports that accommodate XFP optics.
An LED that indicates if power is being received by the module.
Four LEDs per port that indicate the following port status: Active or Local Rail, TX Pkt, RX Pkt,
and Carrier Rcvd or Remote Fail.
Two IN and two OUT RJ-48C connectors to provide a BITS external clock source and to
propagate a common clock source (Line or BITS) among POS modules.
29, and Figure 30 illustrate these features.
1-port OC-192c POS interface module
1
2
1
2 Port 1 3 Port status LEDs
2-port OC-192c POS interface module
1
2
1
2 Port 1 3 Port 2
10
1 3 5 7
2 4 6 8
1 2 3 4 Active / 5 6 7 8
Local Fail
t
Tx Pk
Rx Pkt
Carrier Rcvd /
Remote Fail
7 Port 6 10 Port status LEDs
8 Port 7 11 BITS clocking ports
9 Port 8
3
1 Active /
Local Fail
t
Tx Pk
Rx Pkt
Carrier Rcvd /
Remote Fail
4 ZBITS clocking ports
3 4
1 Active / 2
Local Fail
2
t
Tx Pk
Rx Pkt
Carrier Rcvd /
Remote Fail
4 Port status LEDs
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
11
4
5
5 BITS clocking ports
53-1002373-02