Storage Environment; Safety Agency Approvals; Electromagnetic Approvals; Port Specifications For All Router Models - Brocade Communications Systems MLX Series Installation Manual

9

Port specifications for all router models

Storage environment

Table 66
TABLE 66
Storage temperature
(-25° – 70° C) -13°– 158°F

Safety agency approvals

•
•
•
•

Electromagnetic approvals

•
•
•
•
•
•
•
•
•
Port specifications for all router models
This section describes port specifications for all router models.

Console port pin assignments

The console port is a standard male DB-9 connector, as shown in
about how you can use this port, refer to
390
provides the storage environment specifications for the Brocade NetIron XMR routers.
Brocade NetIron XMR router storage environment requirements
CAN/CSA-C22.2 No. 60950-1-07/UL60950-1 – Second Edition, Safety of Information
Technology Equipment
EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification, Requirements and
User's Guide
EN 60825-2 Safety of Laser Products – Part 2: Safety of Optical Fibre Communications
Systems
EN 60950-1:2006\IEC 60950-1:2005, Second Edition, Safety of Information Technology
Equipment
FCC Part 15, Subpart B (Class A)
EN 55022 (CE mark) (Class A)
EN 55024 (CE mark) (Immunity) for Information Technology Equipment
ICES-003 (Canada) (Class A)
AS/NZ 55022 (Australia) (Class A)
VCCI (Japan) (Class A)
EN 61000-3-2
EN 61000-3-3
EN 61000-6-1
Storage humidity
95% maximum relative humidity,
non-condensing
"Console port" on page 20.
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
Storage altitude
(0 – 4500 meters) 0 – 15,000 ft
Figure 252. For information
53-1002373-02