Brocade Communications Systems MLX Series Installation Manual page 137

Because you will need to use a mechanical lift to move and install the device, make sure you allow
enough space to operate the lift. You will also need at least two people to slide the router off the lift
and into the rack.
Once you have completed the preliminary installation preparations (refer to
mount installation steps"
rack or open cabinet.
1. Remove the factory-installed mounting brackets from the router chassis.
2. Attach the front right and left mounting brackets to the chassis using 12 8-32 Phillips flat head
FIGURE 84
Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide
53-1002373-02
on page 112), follow these steps to mount your 32-slot router in a 4-post
screws (provided). Refer to
Attach front right and left mounting brackets to the router chassis
Installing a Brocade MLXe-32 router
Figure 84.
2
"Preliminary rack
119