Position for use
Raise or lower the headrest while pull-
ing it towards the front of the vehicle.
To remove the headrest
Press tab 1 and 2 simultaneously
remove the headrest.
Note: on the saloon version, first lower
the bench seatback (refer to the infor-
mation on the "Rear seat functions" in
To refit the headrest
Insert the headrest rods into the
sleeves, and lower the headrest to the
Lower the headrest as far as possi-
ble, then press tab 2 and lower it com-
When the headrest is set at the
lowest position (position A) this is
for storage only:. It should not be in
this position when a seat is occupied.
The headrest is an impor-
tant safety component:
ensure that it is in place and
in the correct position. The
distance between your head and the
headrest and the distance between
the head and section A should be
as small as possible.