Behind the front seats
With the rear bench seatbacks folded
down, lift cover 8 on each side to
access the anchorage points used as
upper attachments for the net.
Remove rod 5 from its housing and
insert it into the anchorage points 9 (it
must be inserted in ring 7).
To remove the net, proceed in the re-
During installation, do not
place your fingers under the
Risk of injury.
NB: when the luggage net roller is in-
stalled on the back of the large section
of the seatback, a system ensures the
seatback does not fold down uninten-
tionally. It is therefore necessary, after
unlocking the seatback, to tilt it by pull-
ing from the top beyond the point of re-
sistance, from the right-hand rear door
When driving, it is forbid-
den to sit in the small sec-
tion of the rear bench seat
if the large section is folded
down, with the net in position.