× Bookmark added
Download Print This Page


aSSISteD PaRkING bRake

Manual operation

You can control the electronic parking
brake manually.
applying the electronic parking
Pull switch 3. Indicator lights 2 and
light up on the instrument panel.
Releasing the electronic parking
With the ignition on, depress the brake
pedal then press button 3: indicator
lights 2 and
go out.
brief stop
To manually activate the electronic
parking brake, (when stopping at a red
light, or stopping when the engine is
running, etc.): pull and release switch 3.
The brake is released as soon as the
vehicle is started up again.
Special cases
When parking on a slope or towing a
trailer, pull switch 3 for a few seconds
to obtain the maximum braking effect.
To park the vehicle without applying the
assisted parking brake (if there is a risk
of freezing, for example):
– with the engine running and
RENAULT card in reader 4, switch
off the engine by pressing engine
Start/Stop button 1;
– select a gear (manual gearbox) or
position P (automatic gearbox);
– depress the brake pedal and press
switch 3 at the same time;
– remove the RENAULT card from the


Table Of Contents

Comments to this Manuals

Symbols: 0
Latest comments: