aSSISteD PaRkING bRake
The electronic parking brake en-
sures vehicle immobilisation when the
engine is stopped and engine Start/
Stop button 1 is pressed.
For certain country-specific model ver-
sions, the automatic brake application
function is not activated. Refer to the in-
formation on "Manual operation".
To confirm that the electronic parking
brake is applied, the message "parking
brake applied" and indicator light
on the instrument panel and indicator
light 2 on switch 3 light up.
Indicator light 2 goes out several min-
utes after the electronic parking brake
has been applied and indicator light
goes out when the vehicle is
The message "apply parking brake" ap-
pears on the instrument panel and a
beep sounds to indicate that the elec-
tronic parking brake is applied or re-
leased: This message may appear:
– with the engine running: when the
driver's door is opened;
– with the engine switched off (e.g.
when the engine stalls): when a front
door is opened.
In this case, pull and release switch 3 to
apply the electronic parking brake.
The brake will be released as soon as
the vehicle starts and accelerates.
switch 3 and indicator light
on the instrument panel light up to
show that the parking brake is ap-
plied but go out when the doors are
Before leaving the vehicle,
check that the electronic
parking brake is fully ap-
plied. Indicator light 2 on