REAR HEAD RESTS
1
To raise it
Slide it to the required height.
To lower it
Pull it towards you and slide it to the re-
quired height.
To remove it
Raise the headrest then press tabs 1 to
release it.
To refit it
Press tab 1 and insert the rods into the
holes, with the notches facing forwards.
2
Storage position 2
Pull it towards you and lower it com-
pletely.
When the headrest is set at the
lowest position, this is for storage
only. It should not be in this position
when a seat is occupied.
The headrest is a safety
component; check that it is
fitted and in the correct po-
sition. The top of the head-
rest should be as close as possible
to the top of the head.
3.33