vEHIcLE sETTINgs cUsTOmIsATION mENU
This function, integrated into trip com-
puter and warning system 1, allows
certain vehicle functions to be acti-
vated/deactivated and adjusted.
Accessing the vehicle
With the vehicle stationary, press either
button 2 or 3 several times until the
"settings menu: long press" message
is shown on display 1. Press either
button 2 or 3 for longer than 2 seconds
to enter the menu.
Adjusting the settings
Press one of buttons 2 or 3 to select a
function to change:
a) unlocking the driver's door only;
b) automatic locking of the doors while
c) automatic daytime running lights
d) rear screen wiping in reverse gear;
e) front parking distance control;
f) rear parking distance control;
g) parking distance control volume;
h) instrument panel language.
Once a line has been selected, keep
pressing either button 2 or 3 to change
For the "parking distance control
volume" or "language" functions, you
will have to make a further selection. In
this case, make your selection and con-
firm it by holding either button 2 or 3,
the value selected is shown by a
in front of the line.
To exit the menu, select "exit" or "back"
then confirm by keeping either button 2
or 3 pressed. It may be necessary to
carry out this operation several times.
The vehicle settings customisation
menu cannot be used when driv-
ing. At speeds of above 12 mph (20
km/ h) for vehicles with a manual
gearbox (0 mph for vehicles with an
automatic gearbox), the on-board
display returns automatically to the
trip computer and warning system