fRONT sEATs WITH mANUAL cONTROL
To move the seat forwards or
Lift handle 1 to release. Release the
handle at the desired position and
make sure that it is locked.
To tilt the seatback
Turn control knob 4 to the required po-
To adjust the lumbar support
on the driver's seat:
Lower handle 5 to increase the support
and lift to decrease it.
To raise or lower the seat
Move lever 3 as many times as neces-
sary upwards or downwards.
(depending on vehicle)
With the engine running, turn control 2
to either position 1, 2 or 3 (depending
on the temperature required). An in-
dicator light on the instrument panel
lights up once the front seat heating
system is operating.
The system, which has a thermostat,
decides whether or not the heating is
For safety reasons, make
these adjustments only
when the vehicle is station-
We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts is
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.