Rear view mirrors which tilt
in reverse gear
For vehicles equipped with the driver's
seat with position memory, you can tilt
the door mirrors when reversing and
store the position.
setting and storage
With the vehicle stationary and reverse
gear engaged, select the door mirror
using switch 3 then, with button 1,
adjust it to the required position. Store
the position (refer to the information on
the "Driver's seat with position memory"
in Section 1).
Recalling the memorised position
With the vehicle stationary and re-
verse gear engaged, select the door
mirror using switch 3 and then briefly
press the memory button chosen pre-
viously (refer to the information on the
"Driver's seat with position memory" in
Returning to the driving position
– 10 seconds after reverse gear has
– speed above 6 mph (10 km/h);
– engine switched off;
– switch 3 in the neutral position.
For safety reasons, carry
out any adjustments when
the vehicle is not being
Interior rear view mirror
Its position can be adjusted.
Rear view mirror with lever 4
When driving at night, to avoid being
dazzled by the headlights of the vehicle
behind, depress the little lever located
behind rear view mirror 4.
Rear view mirror without lever 4
The rear view mirror darkens automati-
cally at night if you are being followed
by a vehicle with its lights on.