enGIne OIL LeVeL: general information
Reading the level using the
– remove the dipstick (refer to the fol-
lowing pages for its location) and
wipe it with a clean lint-free cloth;
– push the dipstick in as far as it will go
(for vehicles equipped with a "cap-
type dipstick" C, screw the cap in
– take out the dipstick again;
– read the level: it should never fall
below minimum mark A or exceed
maximum mark B.
Once the operation has been com-
pleted, ensure that the dipstick is
pushed in as far as it will go or that the
cap-type dipstick is completely screwed
Consult your approved Dealer at
once if you notice an abnormal or
repeated drop in any of the fluid
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
exceeding the maximum
engine oil level
The oil level should only be read with
the dipstick as explained above.
If the oil level exceeds the maximum
level, do not start your vehicle and
contact an approved Dealer.
Deactivate the Stop and
Start function for any opera-
tion performed in the engine
Under no circumstances
should maximum filling
level B be exceeded: this
could damage the engine
and the catalytic converter.