Download Print this page

Advertisement

PaRkING DIStaNCe CoNtRoL
operating principle
Ultrasonic detectors, installed in the
front or rear bumper depending on the
vehicle, measure the distance between
the vehicle and an obstacle whilst re-
versing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 25 centi-
metres from the obstacle.
This function is an additional aid that indicates the distance between the
vehicle and an obstacle whilst reversing, using sound signals.
Under no circumstances should it replace the driver's care or responsibil-
ity whilst reversing.
The driver should always look out for sudden hazards during driving: always
ensure that there are no moving obstacles (such as a child, animal, pram or bi-
cycle, etc.) or small, narrow objects such as stones or posts in your path when
manoeuvring.
2.34
(1/3)
adjusting the parking
distance control volume
From the vehicle settings customisation
menu (refer to "vehicle settings custom-
isation menu" in Section 1), select the
line "parking distance control volume",
adjust the volume and press key 1 or 2
to confirm.
1
2

Advertisement

Table Of Contents

Comments to this Manuals

Symbols: 0
Latest comments: