Download Print this page

Advertisement

cHILd sAfETY: fitting a child seat
child seat installation
diagram
³
Check the status of the air bag
before fitting a child seat or allowing a
passenger to use the seat.
²
Seat not suitable for fitting child
seats.
RIsK Of dEATH OR sERIOUs INJURY: before installing a rear-facing
child seat in the front passenger seat, make sure the air bag has been
deactivated (refer to the information on "Child safety: front passenger air
bag deactivation/activation" Section 1).
(2/3)
child seat attached using the belt
¬
Seat which allows a child seat
with "Universal" approval to be attached
by a seat belt.
Seat which only allows a rear-
facing seat with "Universal" approval
to be attached with a seat belt.
child seat attached using the IsOfIX
mounting
ü
Seat which allows an ISOFIX
child seat to be fitted.
±
The rear seats are fitted with
an anchorage point which allows a
forward-facing ISOFIX child seat with
universal approval to be fitted. The an-
chorage points are located at the back
of the rear bench seat.
The size of the ISOFIX child seat is in-
dicated by a letter:
– A, B and B1: for forward-facing seats
in group 1 (9 to 18 kg);
– C: rear-facing seats in group 1 (9 to
18 kg);
– D and E: shell seat or rear-facing
seats in group 0 or 0+ (less than
13 kg);
– F and G: cots in group 0 (less than
10 kg).
Using a child safety system
which is not approved for
this vehicle will not correctly
protect the baby or child.
They risk serious or even fatal injury.
1.35

Advertisement

Table Of Contents

Comments to this Manuals

Symbols: 0
Latest comments: