Starting the vehicle using the
battery from another vehicle
Ensure that there is no risk of contact
between the two vehicles (risk of short
circuiting when the positive terminals
are connected) and that the discharged
battery is properly connected. Switch
off your vehicle ignition.
Start the engine of the vehicle supply-
ing the current and run it at an interme-
diate engine speed.
Leads A and B must only be con-
nected to the terminals indicated.
Check that there is no con-
tact between leads A and B
and that the positive lead A
is not touching any metal
parts on the vehicle supplying the
Risk of injury or damage to the ve-
Battery in the engine compartment
Connect the positive cable A to the 5
support on the 1 (+) terminal, then to
the 2 (+) terminal of the battery supply-
ing the current.
Connect the negative cable B to the 6
support on the (–) terminal 3 of the
battery supplying the current and then
to the (–) terminal 4 of the discharged
Start the engine. As soon as it is
running, disconnect leads A and B
in reverse order (5 - 4 - 3 - 2).