Table of Contents
Advertisement
PARKING DISTANCE CONTROL
Operating principle
Ultrasonic sensors, fitted in the
vehicle's rear bumper, measure the
distance between the vehicle and an
obstacle when reversing.
3
This measurement is indicated by
beeps which become more frequent
the closer you come to the obstacle,
until they become a continuous beep
when the vehicle is approximately 35
centimetres from the obstacle.
There is a beep when reverse gear is
engaged. If the beep sounds for a long
time (3 seconds), this signals an
operating fault.
NB : ensure that the ultrasonic sensors
are not obscured (by dirt, mud, snow,
etc.).
7 4 - D r i v i n g
Operation
When reverse gear is selected, most
objects which are less than
approximately 1.20 metres from the
rear of the vehicle are detected, a
beep sounds,.
Operating faults
When the system detects an operating
fault, there will be a three-second
continuous beep as a warning. Please
consult an authorised dealer.
This function is an
additional aid that
indicates the distance
between the vehicle and
an obstacle whilst reversing,
using sound signals.
Under no circumstances should it
replace the driver's care or
responsibility whilst reversing.
The driver should always look out
for sudden hazards during
driving : always ensure that there
are no moving obstacles (such as
a child, animal, pram or bicycle,
etc.) or small, narrow objects
such as stones or posts
Advertisement
Table of Contents
