Parking Distance Control - Renault TRIBER 2021 Vehicle User Manual

PARKING DISTANCE CONTROL

Operating principle
Ultrasonic sensors, fitted in the vehi-
cle's rear bumper, measure the dis-
tance between the vehicle and an ob-
stacle when reversing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 35 centi-
metres from the obstacle.
There is a beep when reverse gear is
engaged. If the beep sounds for a long
time (3 seconds), this signals an oper-
ating fault.
NB: ensure that the ultrasonic sensors
are not obscured (by dirt, mud, snow,
etc.).
ENG_NU_1321-2_XBC_Renault_2
Jaune Noir Noir texte
(1/2)
1
Note:
Depending on the vehicle, the screen 1
shows the vehicle surroundings along-
side the beeps.
Aide au parking (XBC - Renault)
Operation:
When reverse gear is selected, most
objects which are less than approxi-
mately 1.20 metres from the rear of the
vehicle are detected, a beep sounds
and, depending on the vehicle, the dis-
play 1 comes on.
ENG_UD68129_2
2.19