Table of Contents
Advertisement
Maintaining the PowerConnect B-Series TI24X Hardware
In this chapter
Hardware maintenance schedule
This chapter provides instructions for maintaining the PowerConnect B-Series TI24X hardware.
DANGER
The procedures in this manual are for qualified service personnel.
The PowerConnect B-Series TI24X switch hardware components require minimal maintenance. Dell
recommends that you clean the fiber- optic connectors on fiber-optic ports and the connected fiber
cable each time you disconnect the cable.
You can replace the following hardware components as needed:
•
•
•
Replacing a fiber optic module
You can remove an SFP or SFP+ from a port and replace it with a new one while the PowerConnect
B-Series TI24X is powered on and running.
This section provides information about the following tasks:
•
•
•
Dell PowerConnect B-Series TI24X Hardware Installation Guide
53-1002265-01
•
Hardware maintenance schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
•
Replacing a fiber optic module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
•
Replacing a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
•
Replacing the fan tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Fiber optic modules (SFP+ transceivers)
Power supplies
Fan tray
"Removing a fiber optic module"
"Installing a new fiber optic module"
"Cabling a fiber optic module"
Chapter
5
37
Advertisement
Table of Contents
