Fujitsu F2MC-8L F202RA Hardware Manual page 326

CHAPTER 13 UART
Figure 13.6-9 Operations in Operating Mode 2 when the Framing Error Occurs
Data
RDRF=0
ORFE
Reception
interrupt
Note:
After initialization is cancelled due to a reset, time for 11 shift-clock cycles is required to initialize the
internal controller. Therefore, be sure to enable the UART prescaler operation (PREN = 1) using the
oscillation frequency register after a reset.
310
0 1 2
START
3 4 5 6 7 8
STOP