Download Print this page
Fujitsu F2MC-8L Operation Manual
Fujitsu F2MC-8L Operation Manual

Fujitsu F2MC-8L Operation Manual

Qfp-48 probe and probe header for mb89r907a series
Hide thumbs Also See for F2MC-8L:


Quick Links



Summary of Contents for Fujitsu F2MC-8L

  • Page 3 This manual explains the handling and operation of the probe header (MB2144-226-01). Read this manual carefully before using these products. *1: The FPT-48P-M13 is the package for the probe and probe header. *2: F MC is the abbreviation of FUJITSU Flexible Microcontroller.
  • Page 4 • Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of Fujitsu or any third party or does Fujitsu warrant non-infringement of any third-party' s intellectual property right or other right by using such information.
  • Page 5: Handling Precautions

    1. Checking the Delivered Product and Accessories Before using the MB2144-226-01, confirm that the following components are included in the product package. • • • • MB2144-226-01 (probe header) : 1 • • • • TQSOCKET048SAW*: 1 • • • • TQPACK048SA* : 1 •...
  • Page 6 3. Using the Products I Setting the jumper plug to switch the C terminal The jumper plug for switching the C terminal on the probe header is used to switch the C terminal capacitive-termination. A 0.1 µF capacitor is mounted on the probe header to perform C terminal capacitive-termination. Depending on the operating environment, change the setting of the jumper plug to select whether C terminal capacitive-termination is performed on a user system or on the probe header.
  • Page 7 Connecting the universal cable assembly To connect the universal cable assembly and the probe header, connect the two 34-pin connectors of the universal cable assembly and the two 34-pin connectors on the probe header. The connectors on the universal cable assembly, and the mounting section of the connectors on the probe header are marked "A"...
  • Page 8 Connecting the probe header to a user system To connect the probe header and the user system, connect the probe header to the TQSOCKET048SAW* mounted on the user system using the TQPACK048SA*. An index mark (one corner of the TQSOCKET048SAW or TQPACK048SA is clipped) indicates the first pin on the TQSOCKET048SAW and on the TQPACK048SA.
  • Page 9 4. Note on Using the MB2144-226-01 A limit exists on the height of components to be mounted on the user board around the probe header to ensure connection between the probe header and the user system. Take this limit into consideration when designing a PC board for the user system. CN737 CN8 38 36 mm...
  • Page 11: Support System

    SS01-25008-1E SUPPORT SYSTEM MC-8L QFP-48 PROBE HEADER for MB89R907A MB2144-226-01 OPERATION MANUAL May 2003 the first edition Electronic Devices Published Edited Business Promotion Dept.

This manual is also suitable for: