Call Channel Programm; Lock Function; Monitor Function - Icom IC-­M71 Instruction Manual

4
BASIC OPERATION
n Call channel programming
The call channel key s used to select Channel 16 by default
(dependng on versons)
often-used channel n each channel group for quck recall.
q Push and hold [DIAL] for 1 sec. several tmes to select the
desred channel group
w Push and hold [16•C] for 1 sec. to se-
lect the call channel.
• "CALL" and call channel number appear.
e Push and hold [16•C] agan for 3 sec.
(untl a long beep changes to 2 short
to enter call channel program-
beeps)
mng condton.
• Call channel number to be programmed
blnks.
r Push to select the desred
[Y]/[Z]
channel.
t Push [16•C] to program the dsplayed
channel as the call channel.
• The call channel number stops blnkng.
10
, however, you can program your most
to be programmed.
(INT, USA, ATIS)
n Lock function
Ths functon electroncally locks all keys
to prevent accdental channel changes and
and [H/L•LOCK])
functon access.
➥ Push [H/L•LOCK] for 1 sec. to turn the lock functon ON
or OFF.
Push
for 1 sec.
Appears while the lock
function is in use.
n Monitor function
The montor functon releases the nose squelch mute to
check the volume level. See p. 19 for detals of the montor
swtch acton.
➥ Push and hold [ ] for 1 sec. to actvate the montor func-
ton.
• " " and " " appear and audo s emtted.
Push
for 1 sec.
(except for [PTT], [ ]
Appears while the
monitor function is
in use.