Memory Channel Programming; D Programming In Vfo Mode; D ProgrammNg N Memory Mode - Icom IC-7600 Instruction Manual

6
MEMORY OPERATION

■ Memory channel programming

Memory channel programmng can be preformed
ether n VFO mode or n memory mode.

D Programming in VFO mode

q Set the desred frequency, operatng mode and fl-
ter wdth n VFO mode.
w Push [∫]/[√] several tmes to select the desred
memory channel.
• Memory lst screen s convenent for selectng the
desred channel. (p. 100)
• Memory channel contents appear n the memory chan-
nel readout (below the frequency readout).
• "--.---.--" appears f the selected memory channel s a
blank channel (and does not have contents).
e Push and hold [MW] for 1 sec. to program the ds-
played frequency, operatng mode, etc., nto the
memory channel.
D Programming in memory mode
q Select the desred memory channel wth [∫]/[√] n
memory mode.
• Memory channel contents appear n the memory chan-
nel readout nstead of the frequency readout.
• No ndcaton appears f the selected memory channel
s a blank channel (and does not have contents).
w Set the desred frequency and operatng mode n
memory mode.
• To program a blank channel, use drect frequency entry
wth the keypad or memo pads, etc. (p. 28)
e Push and hold [MW] for 1 sec. to program the ds-
played frequency and operatng mode nto the
memory channel.
101
[EXAMPLE]:
Programmng 7.088 MHz/LSB nto memory channel 12.
7
SSB
3
or
Beep
MW
Beep Push for 1 sec.
Beep
[EXAMPLE]:
Programmng 21.280 MHz/USB nto memory channel 19.
or then
Beep
MW
Beep Push for 1 sec.
Beep
MW
21
SSB
7