Table of Contents
Advertisement
NOTE: For the other functions, the transceiver must be receiving valid GPS signals, or
your position must be entered. (p. 18)
■ MOB (Man Overboard)
You can enter a Man OverBoard (MOB) waypoint into the transceiver with its GPS
position data, as soon as a person has fallen into the water and needs to be rescued.
This enables you to reach the MOB location even in the dark, or when you have lost
visual contact.
You can select an AIS target during the MOB mode.
D Starting MOB
z Push
to enter the MOB mode.
• Three beeps sound.
• The MOB screen is displayed.
•
is displayed at your current position on the
plotter screen.
TIP: You can also start the MOB mode by
selecting the "Start MOB" item on the Menu
[MENU] > MOB > Start MOB
screen.
D Stopping MOB
1.
Push
to stop the MOB mode.
• "Deactivate MOB. Are you sure?" is displayed.
2.
Push
.
•
disappears, and the transceiver returns to
the previous screen.
TIP: You can also stop the MOB mode by
selecting the "Stop MOB" item on the Menu
screen.
[MENU] > MOB > Stop MOB
OTHER FUNCTIONS
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
64
Advertisement
Table of Contents
