Unpacking - Canon NP6251 Service Manual

A. Unpacking
Step
1 Unpack the copier, and remove the
plastic sheets.
2 Insert the grip that comes with the
machine into the front of the pick-up
side.
Caution:
Be sure to hold the stopper so
that it faces down; otherwise,
it can slip off while lifting the
machine.
3 Hold the grips on the pick-up side
(front/rear), and lift the machine
slightly to remove the two pads.
Then, remove the cardboard sheet
(base plate).
4 Hold the grips (front/rear) on the
delivery side, and lift the machine
slightly to remove the two pads.
Then, remove the cardboard sheets
(base plates).
COPYRIGHT © 1997 CANON INC.
Work
Cardboard sheets
(base plate)
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
Remarks
The machine weighs about 210 kg.
9-5