Multifeeder Assembly; Removing The Multifeeder Assembly; Removing The Pick-Up Roller - Canon NP6251 Service Manual

A. Multifeeder Assembly

1. Removing the Multifeeder Assembly

1) Remove the right cover and the upper right cover, and disconnect the two
connectors .
2) Open the multifeeder assembly, and pull on the grip to open the multifeeder door.
Remove the door tape, and lift the multifeeder assembly to detach it from the hinge.

2. Removing the Pick-Up Roller

1) Open the multifeeder paper guide.
2) Remove the two stop rings
each.
COPYRIGHT © 1997 CANON INC.
Figure 5-801
each (left, right), two shutters each
Figure 5-802
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
, and two rollers
5-61