Adjusting The Deck Separation Roller Pressure - Canon NP6251 Service Manual

Hide thumbs Also See for NP6251:

Table of Contents

CHAPTER 8 PAPER DECK-A1

7. Adjusting the Deck Separation Roller Pressure

If double feeding or separation failure occurs when pick-up is from the side paper

deck, adjust the position of the pressure spring of the deck separation roller

• If pick-up failure occurs, move the spring in the direction of arrow A.

• If double feeding occurs, move the spring in the direction of arrow B.

8. Positioning the Deck Pick-Up Roller Releasing Solenoid (SL101)

Before removing the deck pick-up roller releasing solenoid

try to remember the position of the two fixing screws

to the scale on the support plate; or, mark the position on the support plate to identify the

position of the solenoid.

Be sure to fix the solenoid in its initial position whenever installing it on its own.

Figure 8-457

Figure 8-458

CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

from the support plate,

on the solenoid with reference

Table of Contents