Right Deck Pick-Up Assembly (Cassette Holder); Removing The Pick-Up Assembly From The Copier - Canon NP6251 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
C. Right Deck Pick-Up Assembly (cassette holder)

1. Removing the Pick-Up Assembly from the Copier

1) Slide out the paper deck and the cassette of the pick-up assembly which you want
to remove from the copier.
2) Open the upper right door and the lower right door.
Caution:
The pick-up assembly cannot be removed if you try to remove it without first
removing the paper deck and the cassette because of the lifter.
3) Remove the mounting screw
disconnect the two connectors
4) Remove the two mounting screws
2. Removing the Pick-Up Roller
1) Remove the pick-up assembly.
2) Remove the two stop rings
direction of the arrow.
5-80
COPYRIGHT © 1997 CANON INC.
, and remove the connector cover
.
, and remove the pick-up assembly
Figure 5-834
on the outside, and remove the pick-up roller
Figure 5-835
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
; then,
.
in the