CHAPTER 5 PICK-UP/FEEDING SYSTEM
4) Remove the E-ring
5) Disconnect the connector
the fixing/feeding unit.
3. Removing the Registration Roller (upper rubber roller)
1) Loosen the two set screws
2) Remove the spring
5-94
COPYRIGHT © 1997 CANON INC.
, and push in the spindle shaft
, and remove the registration feeding assembly
Figure 5-858
on the electromagnetic clutch at the rear.
, E-ring
, spacer
Figure 5-859
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
to remove.
, bushing
, and bearing
from
.