CHAPTER 5 PICK-UP/FEEDING SYSTEM
D. Left Deck Pick-Up Assembly
1. Removing the Pick-Up Assembly from the Copier
1) Remove the left/right paper deck.
2) Slide out the holding tray feeding assembly about 10 cm to the front.
3) Remove the mounting screws
positioning pins
Note:
When installing the left deck pick-up assembly, slide out the holding tray feeding
assembly slightly to the front.
Pay attention to the engagement of the gear.
2. Removing the Pick-Up Roller
1) Remove the left deck pick-up assembly from the copier.
2) Remove the stop ring
.
5-88
COPYRIGHT © 1997 CANON INC.
from the two positioning pins; then, remove the
, and remove the left deck pick-up assembly
Figure 5-848
from the front and the rear; then, remove the pick-up roller
Figure 5-849
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.