CHAPTER 9 INSTALLATION
Step
9
Disconnect the connector, and
loosen the screw; then, move the
charging assembly metal fixing in
the direction of the arrow (upper
right), and fix it in place with a screw.
Remove
the
assembly.
Using alcohol, clean the primary
charging assembly.
10
Disconnect the connector, and
remove the screw. Then, slide out
the pre-transfer charging assembly.
Using alcohol, clean the pre-transfer
charging assembly.
11
Disconnect the four connectors, and
remove the two screws. (You will
remove the drum fixing screw in step
12.)
Caution:
Free the harness from the edge
saddle.
9-12
COPYRIGHT © 1997 CANON INC.
Work
primary
charging
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Connector
Primary
Screw
charging
assembly
Screw
Cleaner screw
Connector
retainer
Connectors
Screw
Drum fixing
screw
Screw