9. Positioning the Pick-Up Roller Releasing Solenoid of the Cassette
As shown in Figure 5-845, adjust the position of the solenoid so that the distance
from the bottom of the pick-up assembly and the section A of the roller arm is 36 ±0.5
mm. (Use two screws
10. Adjusting the Registration of the Cassette
Loosen the screw
hook plate
. After making adjustments, enter the paper width basic value in serviced
mode (*4*) as instructed in Chapter 11.
COPYRIGHT © 1997 CANON INC.
.)
Figure 5-845
shown in Figure 5-846, and adjust the position of the cassette
Figure 5-846
0±1.5mm
0
2
4
6
8
10
Figure 5-847
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
A
5-87