Canon NP6251 Service Manual page 343

17. Removing the Sub Thermistor (TH2)
1) Slide out the fixing/feeding unit from the copier.
2) Remove the screw
the screw , and remove the harness cover
3) Remove the screw
Caution:
The sub thermistor cannot be replaced in the field. Replace it as part of the sub
thermistor unit
COPYRIGHT © 1997 CANON INC.
, and remove the fixing assembly upper cover
Figure 6-231
, and remove the sub thermistor unit
shown in Figure 6-232.
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
Figure 6-232
CHAPTER 6 FIXING SYSTEM
; then, remove
.
6-35