CHAPTER 5 PICK-UP/FEEDING SYSTEM
G. Feeding Assembly
1. Construction
2. Removing the Fixing/Feeding Unit
1) Remove the front cover; then, open the hopper assembly, take out the power switch
assembly cover, and close the hopper assembly.
2) Slide out the fixing/feeding unit.
3) Remove the screw
stopper
.
5-96
COPYRIGHT © 1997 CANON INC.
Figure 5-861
(one each at left and right), and remove the fixing feeding unit
Figure 5-862 (left stopper)
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Feeding assembly