Removing The Lens Stage Temporarily - Canon NP6251 Service Manual

CHAPTER 3 EXPOSURE SYSTEM

2. Removing the Lens Stage Temporarily

1) Remove the copyboard glass.
2) Move the No. 1 mirror mount to the left of the scanner rail.
Caution:
Be sure to push the center of the No. 1 mirror mount.
3) Remove the lens hood.
4) Remove the mounting screw of the Y direction cable metal clamp; then, fix the end
of the Y direction cable temporarily in place.
5) Remove the mounting screw
lens mount).
6) Remove the mounting screw
together with the holder. (Fix the light-blocking belt mount temporarily in place with
tape to the lens stage.)
3-34
COPYRIGHT © 1997 CANON INC.
, and remove the light-blocking belt retainer
Figure 3-519
, and remove the light-blocking curtain 2 (front)
Figure 3-520
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
(on