Canon NP6251 Service Manual page 496

Bit Position
SW1 1~3 OFF
4 ON
OFF
5 ON
OFF
6 ON
OFF
SW5 1 ON
OFF
2 ON
OFF
3 ON
OFF
4 ON
OFF
5, 6 OFF
Note:
Set the DIP switch (SW5-4) to OFF if the user intends to use Control Card V or only
use remote control by the Copy Data Controller-A1, i.e., if the user wants no more
than such functions as ID input, control by paper size, control by toner color, control
by copying mode, and control by paper type.
COPYRIGHT © 1997 CANON INC.
Description
Selects normal operation.
Selects IPC communication.
Selects serial communication.
Selects the use of a central control
device.
Selects normal operation or remote
control using commercially available
modems.
RAM clear.
Selects normal operation.
For factory use.
Selects normal operation.
Selects control of inch-configured
(11 17, LTR, LGL, STMT) paper.
Selects AB-configured (A3, A4, B4,
B5) paper.
Selects service mode operation.
Selects normal operation.
Selects group control.
De-selects group control.
Reserved.
Table 9-501
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 9 INSTALLATION
Remarks
If this model.
If existing machine.
Requires a Copy Data Interface
Board-B1.
Requires a commercially available
modem and a Copy Data Interface
Board-B1 if remote control using com-
mercially available modems is desired.
To select a size other than those on
the left, use service mode. See 10)
under "C. Checking Operation."
See Note.
9-41