Canon NP6251 Service Manual page 563

CHAPTER 11 TROUBLESHOOTING
10. Adjusting the Position of the Pick-Up Roller Releasing Solenoid (multifeeder)
Slide the solenoid in the direction of A so that the gap between the shutter and
the shutter plate is 0.4 ±0.2 mm when the solenoid is pulled.
A
Figure 11-235
Figure 11-235a
11-32
COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)