Removing The Holding Tray Y Motor - Canon NP6251 Service Manual

5) Remove the two mounting screws, and disconnect the nine connectors
J202, J203, J204, J205, J207, J208, J209, J210); then, remove the holding try drier
PCB .

7. Removing the Holding Tray Y Motor

1) Slide the holding tray to the front and out of the copier.
2) Turn over the holding tray assembly.
3) Remove the two mounting screws
COPYRIGHT © 1997 CANON INC.
Figure 5-878
, and remove the right rail
Figure 5-879
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
.
(J201,
5-105