Removing The Deck Feeding Roller; Orientation Of The Deck Feeding Roller - Canon NP6251 Service Manual

CHAPTER 8 PAPER DECK-A1

4. Removing the Deck Feeding Roller

1) Remove the deck pick-up unit. (See p. 8-44.)
2) Open the deck vertical path assembly, and turn over the deck pick-up unit.
3) Remove the resin ring
toward the front.

5. Orientation of the Deck Feeding Roller

When installing the deck feeding roller
the front. When installing the feeding roller rubber to the feeding roller shaft, make sure
that the marking "5"
8-46
COPYRIGHT © 1997 CANON INC.
, and remove the deck feeding roller
Figure 8-454
faces the rear.
Figure 8-455
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, make sure that the belt pulley
(front)
and the drive belt
is toward