Door Switch Assembly; Removing The Front Door Switch Assembly; Removing The Multifeeder Door Switch Assembly - Canon NP6251 Service Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
C. Door Switch Assembly

1. Removing the Front Door Switch Assembly

1) Open the front door.
2) Remove the inside upper cover.
3) Remove the control panel.
4) Remove the two mounting screws

2. Removing the Multifeeder Door Switch Assembly

1) Remove the front door, and remove the hopper assembly.
2) Remove the three mounting screws
assembly cover
7-28
COPYRIGHT © 1997 CANON INC.
, and remove the door switch assembly
Figure 7-428
.
Figure 7-429
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, and remove the power supply switch
.