Canon NP6251 Service Manual page 493

CHAPTER 9 INSTALLATION
14) Install the grounding wire
15) Disconnect the shorting connector
16) Connect the 4P connector of the machine and the 4P connector of the control card.
Caution:
Be sure to lead the harness through the harness retainer so that it will not come into
contact with the scanner cable or the drive pulley.
9-38
COPYRIGHT © 1997 CANON INC.
of the control card as shown in Figure 9-414.
Figure 9-414
shown in Figure 9-415.
Figure 9-415
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)