Canon NP6251 Service Manual page 293

CHAPTER 5 PICK-UP/FEEDING SYSTEM
4) Turn over the holding tray assembly.
5) Remove the E-ring
6) Remove the two mounting screws
assembly , and disconnect the connector.
7) Remove the two mounting screws, and remove the holding tray Y motor.
5-106
COPYRIGHT © 1997 CANON INC.
, flange , and belt
Figure 5-880
; then, turn over the holding tray Y motor
Figure 5-881
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.