Canon NP6251 Service Manual page 547

CHAPTER 11 TROUBLESHOOTING
8. Routing the Lens X Direction Drive Belt
Fix the lens X direction drive motor
has lowered on its own weight.
9. Adjusting the Position of the Scanner Locking Solenoid (SL1)
1) Remove the rear cover.
2) Remove the multifeeder assembly. (See Chapter 5.)
3) Adjust the stroke of the scanner locking solenoid as indicated.
E-ring
Standards
(10.5 ±0.5 mm;
from bottom of
clamp to top of
solenoid)
Scanner locking
solenoid
11-16
COPYRIGHT © 1997 CANON INC.
with the mounting screw
Own weight
Figure 11-216
Figure 11-217
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
where the motor
Loosen these
two screws to
adjust.