CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
P. DC Power Supply Assembly
1. Removing the DC Power Supply Assembly
1) Remove the upper left cover and the lower left cover.
2) Remove the nine mounting screws
plate
.
3) Disconnect the nine connectors (J303, J304, J305, J306, J308, J309, J311, J312,
AC relay connector).
4) Remove the two mounting screws
together with its mount.
7-52
COPYRIGHT © 1997 CANON INC.
, and remove the DC power supply protection
Figure 7-466
, and remove the DC power supply PCB
Figure 7-467
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)