Removing The Feeding Roller; Removing The Separation Roller - Canon NP6251 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM

3. Removing the Feeding Roller

1) Remove the pick-up assembly from the copier.
2) Remove the screw
3) Remove the stop ring
4) Remove the stop ring
feeding roller

4. Removing the Separation Roller

1) Remove the two mounting screws, and remove the feeding guide plate
remove the open/close guide
5-82
COPYRIGHT © 1997 CANON INC.
, and remove the feeding roller cover
from the front of the feeding roller.
and the pick-up roller
together with the timing belt
Figure 5-837
.
Figure 5-838
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
at the front; then, remove the
.
; then,