CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
F. Main Motor Assembly
1. Removing the Main Motor
1) Remove the rear cover.
2) Remove the high-voltage PCB.
3) Remove the spring
screws
, detach the belt from the end of the main motor, and remove the main
motor
.
7-34
COPYRIGHT © 1997 CANON INC.
, and loosen the tension pulley; then, remove the four mounting
Figure 7-439
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)