Canon NP6251 Service Manual page 251

CHAPTER 5 PICK-UP/FEEDING SYSTEM
3) Remove the spring
at the front; then, pull out the positioning pin
roller assembly
4) Remove the two mounting screws
.
5) Remove the joint, and remove the separation roller
Caution:
Take care when removing the separation roller, as the bushing at the front becomes
disengaged.
5-64
COPYRIGHT © 1997 CANON INC.
at the front and the rear, and remove the mounting screw
.
Figure 5-805
, and remove the separation roller support plate
Figure 5-806
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
, and remove the registration lower
.